Contact Bedrooms PlusContact Us on 01698 209888
Bedrooms Plus Reviews

Fixings and Tools

Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit

Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit
Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit
Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit
Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit
Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit

Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit

£9.95 RRP: £12.99
Stock Status: In Stock
Product Code: MBONDSMALL
Delivery: FREE UK P&P
Brand: Unika
GTIN: 5060416321972
Youtube
Facebook
Twitter
Instagram
Unika Mitre Bond Superglue 50g & Activator Pen, Super Glue Bonding Kit NEW – MitrePen is an environmentally friendly, precision marker that prevents the staining caused by overspray.
Mitrebond is quick and clean and sets in 15 seconds
No mixing or heating Use one or two drops per joint & a 50g bottle is sufficient for 100 cornice joints.

As you only use a small amount the result is a very clean and tight joint every time.

Apply to: MDF, Timber, Glass, Ceramics, Aluminium, Chipboard, Perspex, Steel, Porcelain, Some Plastics
Use on: Cornice & Profile Mitre Joints, Melamine end strips, door trims, picture frames, mdf, skirting joints etc.

Blister Pack: 1 x MitrePen and 1 x 50g MitreBond adhesive
Trade Pack: 1 x MitrePen and 3 x 50g MitreBond adhsive


As MitrePen is a precision marker there will be no danger of ruining cornice etc, with overspray.
MitrePen is small and neat to carry around and can be used on any superglue to speed up fixing time.
MitrePen is a brand new way to apply MitreBond activator.
MitrePen is not affected by sunlight so there is no yellowing.
MitrePen covers the same area as 3 x 200ml activator sprays.
MitrePen will set superglue in 10 seconds.
It is non hazardous and environmentally friendly

Directions for use:
Ensure both surfaces to be joined are clean cut and free from oil or grease.
Apply MitreBond adhesive (or any other superglue) to one side of the joint.
Apply MitrePen activator to the other side of the joint.
Quickly bring the two sides into line and firmly press together, hold for 10 seconds.
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product